PulseFin™ — Swap Your Ugly Whip Antenna for That Clean Factory Shark-Fin Look
Park Next to Any New Audi and Stop Looking Ten Years Behind
If your stock whip antenna looks like a bent coat hanger after one too many car washes, PulseFin™ is the 60-second fix. Stick-on shark fin, internal copper coil keeps your AM/FM clean, and a finish that reads "factory" — not "aftermarket." Same silhouette the new BMWs, Audis and Mercs roll out the showroom with.
Tired of the Whip Antenna That Sticks Out Like a Sore Thumb?
The old rubber whip gets bent every wash, whistles at motorway speed, and dates your car the second a newer model parks beside you. Stubby replacements still look cheap. PulseFin™ sits flush, holds in a car wash, and gives the roofline the shark-fin profile your car should've come with.
➤ Factory Shark-Fin Silhouette: Low-profile aerodynamic shell finished in your choice of carbon fibre, gloss black, ivory white, or nickel silver — so it reads OEM, not stick-on.
➤ Keeps Your Reception Clean: Built-in copper coil and pass-through cable plug into your existing antenna socket, so AM/FM/DAB and GPS keep coming through the way they did before — no dead zones.
➤ Sticks On in Under 5 Minutes: Heavy-duty 3M-grade adhesive base bonds to a clean roof and holds through wind, rain, snow, and pressure washes — no drilling, no clips, no tools.
SmartSignal™ Coil — How PulseFin™ Keeps Your AM/FM Coming Through Clean
Most decorative shark fins are hollow plastic — slap one on and you lose your radio. PulseFin™ ships with a built-in copper SmartSignal™ coil and a pass-through cable that plugs straight into your existing antenna socket.
Translation: you keep the AM/FM/DAB and GPS reception you already had, and you get the look you actually wanted. That's the whole job.
Drivers Who Were Sick of Their Whip Antenna — and Finally Did Something About It
Mark T., 41, drives a 2013 Golf and was tired of the antenna looking like it belonged on a 90s saloon. "Stuck it on in the driveway, plugged the cable in, radio came on the same as before. Looks like it came that way from the factory. Took me five minutes." His mates clocked it the next weekend and asked where he got it.
What You Actually Get When You Stick One On
✓ A Roofline That Looks Five Years Newer: Drop the bent whip and the cheap stubby — your car finally matches its own decade.
✓ Quieter Drives at Motorway Speed: Aerodynamic shell cuts the wind-whistle whip antennas make at 70+ — you'll hear the difference on the first long drive.
✓ A Five-Minute Job, Done in the Driveway: Clean, peel, plug, press. No trip to the garage, no tools out of the boot.
Stick It On in 4 Steps — Driveway to Done
Step 1: Wipe the roof spot clean and dry — any wax or dust kills the bond.
Step 2: Unscrew your old whip antenna and set it aside.
Step 3: Plug the PulseFin™ cable into the antenna socket your whip just came out of.
Step 4: Peel the 3M backing, position the fin, press down for 30 seconds. Done — go switch the radio on.
| PulseFin™ | Old Whip Antenna | Cheap Stick-On Fins |
|---|---|---|
| Factory shark-fin silhouette in 4 finish options | ❌ | ❌ |
| Internal copper coil + pass-through cable keeps AM/FM clean | ✓ | ❌ |
| 3M-grade adhesive base — holds through car washes and winter | ❌ | ❌ |
| Cuts wind-whistle at motorway speed | ❌ | ❌ |
The Specs
- Material: Premium ABS plastic shell with carbon-fibre or gloss finish
- Colours: Carbon Fibre Black, Deep Black, Ivory White, Nickel Silver
- Signal Support: Internal copper SmartSignal™ coil with pass-through cable for AM/FM, DAB and GPS
- Fit: Universal — works on sedans, hatchbacks, SUVs and most pickups with a flat or slightly curved roof spot
- Installation: 3M-grade adhesive base, no drilling, no tools
The Questions Everyone Asks Before They Click Buy
Will this actually fit my car?
Yes — PulseFin™ is universal. It bonds to any flat or slightly curved roof spot (sedans, hatchbacks, SUVs, most pickups). The cable plugs into the standard antenna socket your whip currently lives in.
Will it fall off in a car wash or in winter?
No. The 3M-grade adhesive base bonds for the long haul once it's pressed onto a clean, dry surface. It's tested through rain, snow, sub-zero and pressure-wash settings.
Will it kill my radio reception?
No — that's why the cable exists. Unlike hollow decorative covers, PulseFin™ has an internal copper coil and a pass-through cable that plugs into your antenna socket, so your AM/FM, DAB and GPS keep coming through the way they did before.
Do I really not need any tools?
Right — your only job is unscrewing the old whip (hand-tight on most cars). After that it's wipe, peel, plug, press. Five minutes start to finish.
Which colour should I pick?
Carbon Fibre Black and Deep Black work on virtually any car colour. Ivory White is matched for white and silver bodies. Nickel Silver suits grey, silver and metallic paintwork.
Drive Tomorrow Looking Like You Should've Been Driving All Along
Park your PulseFin™ on this weekend and the next time you pull up next to that brand-new Audi in the car park, your roofline holds its own. If it doesn't sit right on your car or doesn't hold its bond, we'll refund every penny.
More Images
PulseFin™ — Swap Your Ugly Whip Antenna for That Clean Factory Shark-Fin Look
Park Next to Any New Audi and Stop Looking Ten Years Behind
If your stock whip antenna looks like a bent coat hanger after one too many car washes, PulseFin™ is the 60-second fix. Stick-on shark fin, internal copper coil keeps your AM/FM clean, and a finish that reads "factory" — not "aftermarket." Same silhouette the new BMWs, Audis and Mercs roll out the showroom with.
Tired of the Whip Antenna That Sticks Out Like a Sore Thumb?
The old rubber whip gets bent every wash, whistles at motorway speed, and dates your car the second a newer model parks beside you. Stubby replacements still look cheap. PulseFin™ sits flush, holds in a car wash, and gives the roofline the shark-fin profile your car should've come with.
➤ Factory Shark-Fin Silhouette: Low-profile aerodynamic shell finished in your choice of carbon fibre, gloss black, ivory white, or nickel silver — so it reads OEM, not stick-on.
➤ Keeps Your Reception Clean: Built-in copper coil and pass-through cable plug into your existing antenna socket, so AM/FM/DAB and GPS keep coming through the way they did before — no dead zones.
➤ Sticks On in Under 5 Minutes: Heavy-duty 3M-grade adhesive base bonds to a clean roof and holds through wind, rain, snow, and pressure washes — no drilling, no clips, no tools.
SmartSignal™ Coil — How PulseFin™ Keeps Your AM/FM Coming Through Clean
Most decorative shark fins are hollow plastic — slap one on and you lose your radio. PulseFin™ ships with a built-in copper SmartSignal™ coil and a pass-through cable that plugs straight into your existing antenna socket.
Translation: you keep the AM/FM/DAB and GPS reception you already had, and you get the look you actually wanted. That's the whole job.
Drivers Who Were Sick of Their Whip Antenna — and Finally Did Something About It
Mark T., 41, drives a 2013 Golf and was tired of the antenna looking like it belonged on a 90s saloon. "Stuck it on in the driveway, plugged the cable in, radio came on the same as before. Looks like it came that way from the factory. Took me five minutes." His mates clocked it the next weekend and asked where he got it.
What You Actually Get When You Stick One On
✓ A Roofline That Looks Five Years Newer: Drop the bent whip and the cheap stubby — your car finally matches its own decade.
✓ Quieter Drives at Motorway Speed: Aerodynamic shell cuts the wind-whistle whip antennas make at 70+ — you'll hear the difference on the first long drive.
✓ A Five-Minute Job, Done in the Driveway: Clean, peel, plug, press. No trip to the garage, no tools out of the boot.
Stick It On in 4 Steps — Driveway to Done
Step 1: Wipe the roof spot clean and dry — any wax or dust kills the bond.
Step 2: Unscrew your old whip antenna and set it aside.
Step 3: Plug the PulseFin™ cable into the antenna socket your whip just came out of.
Step 4: Peel the 3M backing, position the fin, press down for 30 seconds. Done — go switch the radio on.
| PulseFin™ | Old Whip Antenna | Cheap Stick-On Fins |
|---|---|---|
| Factory shark-fin silhouette in 4 finish options | ❌ | ❌ |
| Internal copper coil + pass-through cable keeps AM/FM clean | ✓ | ❌ |
| 3M-grade adhesive base — holds through car washes and winter | ❌ | ❌ |
| Cuts wind-whistle at motorway speed | ❌ | ❌ |
The Specs
- Material: Premium ABS plastic shell with carbon-fibre or gloss finish
- Colours: Carbon Fibre Black, Deep Black, Ivory White, Nickel Silver
- Signal Support: Internal copper SmartSignal™ coil with pass-through cable for AM/FM, DAB and GPS
- Fit: Universal — works on sedans, hatchbacks, SUVs and most pickups with a flat or slightly curved roof spot
- Installation: 3M-grade adhesive base, no drilling, no tools
The Questions Everyone Asks Before They Click Buy
Will this actually fit my car?
Yes — PulseFin™ is universal. It bonds to any flat or slightly curved roof spot (sedans, hatchbacks, SUVs, most pickups). The cable plugs into the standard antenna socket your whip currently lives in.
Will it fall off in a car wash or in winter?
No. The 3M-grade adhesive base bonds for the long haul once it's pressed onto a clean, dry surface. It's tested through rain, snow, sub-zero and pressure-wash settings.
Will it kill my radio reception?
No — that's why the cable exists. Unlike hollow decorative covers, PulseFin™ has an internal copper coil and a pass-through cable that plugs into your antenna socket, so your AM/FM, DAB and GPS keep coming through the way they did before.
Do I really not need any tools?
Right — your only job is unscrewing the old whip (hand-tight on most cars). After that it's wipe, peel, plug, press. Five minutes start to finish.
Which colour should I pick?
Carbon Fibre Black and Deep Black work on virtually any car colour. Ivory White is matched for white and silver bodies. Nickel Silver suits grey, silver and metallic paintwork.
Drive Tomorrow Looking Like You Should've Been Driving All Along
Park your PulseFin™ on this weekend and the next time you pull up next to that brand-new Audi in the car park, your roofline holds its own. If it doesn't sit right on your car or doesn't hold its bond, we'll refund every penny.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Park Next to Any New Audi and Stop Looking Ten Years Behind
If your stock whip antenna looks like a bent coat hanger after one too many car washes, PulseFin™ is the 60-second fix. Stick-on shark fin, internal copper coil keeps your AM/FM clean, and a finish that reads "factory" — not "aftermarket." Same silhouette the new BMWs, Audis and Mercs roll out the showroom with.
Tired of the Whip Antenna That Sticks Out Like a Sore Thumb?
The old rubber whip gets bent every wash, whistles at motorway speed, and dates your car the second a newer model parks beside you. Stubby replacements still look cheap. PulseFin™ sits flush, holds in a car wash, and gives the roofline the shark-fin profile your car should've come with.
➤ Factory Shark-Fin Silhouette: Low-profile aerodynamic shell finished in your choice of carbon fibre, gloss black, ivory white, or nickel silver — so it reads OEM, not stick-on.
➤ Keeps Your Reception Clean: Built-in copper coil and pass-through cable plug into your existing antenna socket, so AM/FM/DAB and GPS keep coming through the way they did before — no dead zones.
➤ Sticks On in Under 5 Minutes: Heavy-duty 3M-grade adhesive base bonds to a clean roof and holds through wind, rain, snow, and pressure washes — no drilling, no clips, no tools.
SmartSignal™ Coil — How PulseFin™ Keeps Your AM/FM Coming Through Clean
Most decorative shark fins are hollow plastic — slap one on and you lose your radio. PulseFin™ ships with a built-in copper SmartSignal™ coil and a pass-through cable that plugs straight into your existing antenna socket.
Translation: you keep the AM/FM/DAB and GPS reception you already had, and you get the look you actually wanted. That's the whole job.
Drivers Who Were Sick of Their Whip Antenna — and Finally Did Something About It
Mark T., 41, drives a 2013 Golf and was tired of the antenna looking like it belonged on a 90s saloon. "Stuck it on in the driveway, plugged the cable in, radio came on the same as before. Looks like it came that way from the factory. Took me five minutes." His mates clocked it the next weekend and asked where he got it.
What You Actually Get When You Stick One On
✓ A Roofline That Looks Five Years Newer: Drop the bent whip and the cheap stubby — your car finally matches its own decade.
✓ Quieter Drives at Motorway Speed: Aerodynamic shell cuts the wind-whistle whip antennas make at 70+ — you'll hear the difference on the first long drive.
✓ A Five-Minute Job, Done in the Driveway: Clean, peel, plug, press. No trip to the garage, no tools out of the boot.
Stick It On in 4 Steps — Driveway to Done
Step 1: Wipe the roof spot clean and dry — any wax or dust kills the bond.
Step 2: Unscrew your old whip antenna and set it aside.
Step 3: Plug the PulseFin™ cable into the antenna socket your whip just came out of.
Step 4: Peel the 3M backing, position the fin, press down for 30 seconds. Done — go switch the radio on.
| PulseFin™ | Old Whip Antenna | Cheap Stick-On Fins |
|---|---|---|
| Factory shark-fin silhouette in 4 finish options | ❌ | ❌ |
| Internal copper coil + pass-through cable keeps AM/FM clean | ✓ | ❌ |
| 3M-grade adhesive base — holds through car washes and winter | ❌ | ❌ |
| Cuts wind-whistle at motorway speed | ❌ | ❌ |
The Specs
- Material: Premium ABS plastic shell with carbon-fibre or gloss finish
- Colours: Carbon Fibre Black, Deep Black, Ivory White, Nickel Silver
- Signal Support: Internal copper SmartSignal™ coil with pass-through cable for AM/FM, DAB and GPS
- Fit: Universal — works on sedans, hatchbacks, SUVs and most pickups with a flat or slightly curved roof spot
- Installation: 3M-grade adhesive base, no drilling, no tools
The Questions Everyone Asks Before They Click Buy
Will this actually fit my car?
Yes — PulseFin™ is universal. It bonds to any flat or slightly curved roof spot (sedans, hatchbacks, SUVs, most pickups). The cable plugs into the standard antenna socket your whip currently lives in.
Will it fall off in a car wash or in winter?
No. The 3M-grade adhesive base bonds for the long haul once it's pressed onto a clean, dry surface. It's tested through rain, snow, sub-zero and pressure-wash settings.
Will it kill my radio reception?
No — that's why the cable exists. Unlike hollow decorative covers, PulseFin™ has an internal copper coil and a pass-through cable that plugs into your antenna socket, so your AM/FM, DAB and GPS keep coming through the way they did before.
Do I really not need any tools?
Right — your only job is unscrewing the old whip (hand-tight on most cars). After that it's wipe, peel, plug, press. Five minutes start to finish.
Which colour should I pick?
Carbon Fibre Black and Deep Black work on virtually any car colour. Ivory White is matched for white and silver bodies. Nickel Silver suits grey, silver and metallic paintwork.
Drive Tomorrow Looking Like You Should've Been Driving All Along
Park your PulseFin™ on this weekend and the next time you pull up next to that brand-new Audi in the car park, your roofline holds its own. If it doesn't sit right on your car or doesn't hold its bond, we'll refund every penny.
