VeloGrip™ — Lock Your Phone Down Through Every Bump, Brake & Backroad
Lock Your Phone Down Through Every Bump, Brake & Backroad
If you've gone through three cheap phone mounts this year, VeloGrip™ is the one that ends the cycle. Dual-layer magnets hold through OtterBox-thick cases, and the 11 lbs vacuum base stays locked to your dashboard so you can finally set it and forget it.
Stop Fishing Your Phone Out of the Footwell at Every Red Light
You hit a pothole, the phone slides, and suddenly you're fumbling in traffic and missing the next exit. Vent clips snap. Suction cups peel off in summer heat. Weak magnets give up the second you put a case on. The mounts you've been buying weren't built for the way you actually drive.
➤ Holds Through a Thick Case — Not Just Bare Glass: Dual-layer neodymium magnets pull hard enough to grip your phone through a heavy-duty case with a metal plate inside, so you don't have to strip it down before every drive.
➤ 11 lbs Vacuum Base That Doesn't Quit on a Hot Day: A twist-lock vacuum seal — not cheap 3M adhesive — grabs your dashboard with 11 lbs of suction force. Twist to lock, twist to release. No residue, no peel.
➤ Three-Axis Fold for Any Viewing Angle You Want: 180° at the head, 360° at the stem, 180° at the base. Portrait for Maps, landscape for CarPlay, low-profile when parked — flick it into position one-handed.
How VeloGrip™ Holds When Every Other Mount Slides
Two systems doing two jobs. Dual-layer magnets stack the pull from both sides of the contact ring, so the grip on your phone gets stronger as the load shifts during a turn — not weaker. Underneath, a twist-lock vacuum seal creates a low-pressure pocket between the base and your dashboard, locking the whole mount in place with 11 lbs of pull force.
It's the difference between a phone holder built for a stationary desk and a phone holder built for potholes, speed bumps, and the on-ramp at 65 mph. Set it once. Drive normally. Stop worrying.
Why Drivers Who've Been Through Five Mounts Finally Stopped Buying Replacements
"I bought this expecting to return it. I've got a thick case with a wallet on the back and every magnetic mount I've tried just gives up. Six weeks in, VeloGrip™ hasn't budged once — not even on the gravel road to my parents' place." — Marcus T.
"My old suction mount fell off my windshield in 95° heat last August. Tried this on the dashboard instead — it's been on there through two summers now. No peel, no slide." — Dana R.
Hands on the Wheel. Eyes on the Road. Phone Where You Put It.
✓ One-Handed Snap and Twist: Drop your phone onto the magnetic ring, twist to your angle, drive. No clamps to release, no arms to adjust, nothing that takes both hands.
✓ Built to Hold Through Potholes and Hard Brakes: Magnets and vacuum work together — the harder the jolt, the more both grips engage. Tested by drivers on gravel roads and city potholes alike.
✓ Aluminum Alloy Core That Outlasts Your Phone: CNC-machined aluminum hinges and ABS plastic housing — no flimsy plastic ball joints that snap after a winter.
Three Steps to a Mount You'll Never Have to Replace
Step 1: Wipe your dashboard or windshield clean — a dry, dust-free surface gives the vacuum seal its full 11 lbs of pull.
Step 2: Press the base down firmly and twist the dial to "TIGHT" until the vacuum locks. You'll feel it grip.
Step 3: Snap your phone onto the magnetic ring, fold and rotate to your angle, and drive normally.
| VeloGrip™ 360° Magnetic Mount | $12 Vent Clips & Suction Mounts | Cup Holder / Loose on Seat |
|---|---|---|
| Holds your phone through a thick case with dual-layer magnets | ❌ Slips with anything thicker than a slim case | ❌ Slides into the footwell every brake |
| 11 lbs twist-lock vacuum base — no peeling adhesive | ❌ 3M tape peels in summer heat | ❌ Nothing securing the phone at all |
| Three-axis fold for any portrait/landscape angle, one-handed | ❌ Two or three fixed positions, both hands needed | ❌ You're glancing down, not looking forward |
Specs That Matter Before You Buy
- Build: CNC-machined aluminum alloy hinges, ABS plastic housing
- Vacuum Base Pull Force: 11 lbs (twist-lock seal)
- Magnet System: Dual-layer neodymium ring
- Phone Compatibility: Fits 4.7" to 7" devices (works through most cases with included metal plate)
- Rotation: 360° stem, 180° head, 180° base
- Color: Black or Silver
The Questions Drivers Ask Before They Hit Add to Cart
Will the suction hold on a hot dashboard in summer?
Yes — this is a twist-lock vacuum seal, not 3M adhesive, so heat doesn't peel it. Drivers report stable hold through 95°+ summer dashboards. If grip ever fades, a quick wipe on the suction pad refreshes the seal.
Will it hold my phone with a thick OtterBox or wallet case?
Yes. The dual-layer magnet pulls hard enough to grip through most heavy-duty cases. For extra thick or non-metallic cases, the included metal plate sticks inside your case or to the back of your phone for a rock-solid bond.
Will the magnets mess with my phone or wireless charging?
No. The magnets create a closed field that holds your phone without affecting GPS, calls, or battery. Wireless charging will work normally when your phone is off the mount.
Will it stick to a curved or textured dashboard?
It grips best on flat, smooth surfaces — clean glass windshields, hard-plastic dash panels, center consoles. Textured leather or fabric dashboards aren't a good fit for the vacuum base.
How do I remove it without leaving residue?
Twist the dial back to "LOOSE" — the vacuum releases and the base lifts off clean. No tape, no glue, no sticky residue on your dashboard.
If VeloGrip™ Slips Even Once, We'll Refund Every Cent
Mount it. Drive it for 60 days. If the magnets ever drop your phone or the vacuum base lets go on a flat dashboard — we'll refund you in full. We can say that because we know what's holding it together.
Original: $34.99
-70%$34.99
$10.50More Images
VeloGrip™ — Lock Your Phone Down Through Every Bump, Brake & Backroad
Lock Your Phone Down Through Every Bump, Brake & Backroad
If you've gone through three cheap phone mounts this year, VeloGrip™ is the one that ends the cycle. Dual-layer magnets hold through OtterBox-thick cases, and the 11 lbs vacuum base stays locked to your dashboard so you can finally set it and forget it.
Stop Fishing Your Phone Out of the Footwell at Every Red Light
You hit a pothole, the phone slides, and suddenly you're fumbling in traffic and missing the next exit. Vent clips snap. Suction cups peel off in summer heat. Weak magnets give up the second you put a case on. The mounts you've been buying weren't built for the way you actually drive.
➤ Holds Through a Thick Case — Not Just Bare Glass: Dual-layer neodymium magnets pull hard enough to grip your phone through a heavy-duty case with a metal plate inside, so you don't have to strip it down before every drive.
➤ 11 lbs Vacuum Base That Doesn't Quit on a Hot Day: A twist-lock vacuum seal — not cheap 3M adhesive — grabs your dashboard with 11 lbs of suction force. Twist to lock, twist to release. No residue, no peel.
➤ Three-Axis Fold for Any Viewing Angle You Want: 180° at the head, 360° at the stem, 180° at the base. Portrait for Maps, landscape for CarPlay, low-profile when parked — flick it into position one-handed.
How VeloGrip™ Holds When Every Other Mount Slides
Two systems doing two jobs. Dual-layer magnets stack the pull from both sides of the contact ring, so the grip on your phone gets stronger as the load shifts during a turn — not weaker. Underneath, a twist-lock vacuum seal creates a low-pressure pocket between the base and your dashboard, locking the whole mount in place with 11 lbs of pull force.
It's the difference between a phone holder built for a stationary desk and a phone holder built for potholes, speed bumps, and the on-ramp at 65 mph. Set it once. Drive normally. Stop worrying.
Why Drivers Who've Been Through Five Mounts Finally Stopped Buying Replacements
"I bought this expecting to return it. I've got a thick case with a wallet on the back and every magnetic mount I've tried just gives up. Six weeks in, VeloGrip™ hasn't budged once — not even on the gravel road to my parents' place." — Marcus T.
"My old suction mount fell off my windshield in 95° heat last August. Tried this on the dashboard instead — it's been on there through two summers now. No peel, no slide." — Dana R.
Hands on the Wheel. Eyes on the Road. Phone Where You Put It.
✓ One-Handed Snap and Twist: Drop your phone onto the magnetic ring, twist to your angle, drive. No clamps to release, no arms to adjust, nothing that takes both hands.
✓ Built to Hold Through Potholes and Hard Brakes: Magnets and vacuum work together — the harder the jolt, the more both grips engage. Tested by drivers on gravel roads and city potholes alike.
✓ Aluminum Alloy Core That Outlasts Your Phone: CNC-machined aluminum hinges and ABS plastic housing — no flimsy plastic ball joints that snap after a winter.
Three Steps to a Mount You'll Never Have to Replace
Step 1: Wipe your dashboard or windshield clean — a dry, dust-free surface gives the vacuum seal its full 11 lbs of pull.
Step 2: Press the base down firmly and twist the dial to "TIGHT" until the vacuum locks. You'll feel it grip.
Step 3: Snap your phone onto the magnetic ring, fold and rotate to your angle, and drive normally.
| VeloGrip™ 360° Magnetic Mount | $12 Vent Clips & Suction Mounts | Cup Holder / Loose on Seat |
|---|---|---|
| Holds your phone through a thick case with dual-layer magnets | ❌ Slips with anything thicker than a slim case | ❌ Slides into the footwell every brake |
| 11 lbs twist-lock vacuum base — no peeling adhesive | ❌ 3M tape peels in summer heat | ❌ Nothing securing the phone at all |
| Three-axis fold for any portrait/landscape angle, one-handed | ❌ Two or three fixed positions, both hands needed | ❌ You're glancing down, not looking forward |
Specs That Matter Before You Buy
- Build: CNC-machined aluminum alloy hinges, ABS plastic housing
- Vacuum Base Pull Force: 11 lbs (twist-lock seal)
- Magnet System: Dual-layer neodymium ring
- Phone Compatibility: Fits 4.7" to 7" devices (works through most cases with included metal plate)
- Rotation: 360° stem, 180° head, 180° base
- Color: Black or Silver
The Questions Drivers Ask Before They Hit Add to Cart
Will the suction hold on a hot dashboard in summer?
Yes — this is a twist-lock vacuum seal, not 3M adhesive, so heat doesn't peel it. Drivers report stable hold through 95°+ summer dashboards. If grip ever fades, a quick wipe on the suction pad refreshes the seal.
Will it hold my phone with a thick OtterBox or wallet case?
Yes. The dual-layer magnet pulls hard enough to grip through most heavy-duty cases. For extra thick or non-metallic cases, the included metal plate sticks inside your case or to the back of your phone for a rock-solid bond.
Will the magnets mess with my phone or wireless charging?
No. The magnets create a closed field that holds your phone without affecting GPS, calls, or battery. Wireless charging will work normally when your phone is off the mount.
Will it stick to a curved or textured dashboard?
It grips best on flat, smooth surfaces — clean glass windshields, hard-plastic dash panels, center consoles. Textured leather or fabric dashboards aren't a good fit for the vacuum base.
How do I remove it without leaving residue?
Twist the dial back to "LOOSE" — the vacuum releases and the base lifts off clean. No tape, no glue, no sticky residue on your dashboard.
If VeloGrip™ Slips Even Once, We'll Refund Every Cent
Mount it. Drive it for 60 days. If the magnets ever drop your phone or the vacuum base lets go on a flat dashboard — we'll refund you in full. We can say that because we know what's holding it together.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Lock Your Phone Down Through Every Bump, Brake & Backroad
If you've gone through three cheap phone mounts this year, VeloGrip™ is the one that ends the cycle. Dual-layer magnets hold through OtterBox-thick cases, and the 11 lbs vacuum base stays locked to your dashboard so you can finally set it and forget it.
Stop Fishing Your Phone Out of the Footwell at Every Red Light
You hit a pothole, the phone slides, and suddenly you're fumbling in traffic and missing the next exit. Vent clips snap. Suction cups peel off in summer heat. Weak magnets give up the second you put a case on. The mounts you've been buying weren't built for the way you actually drive.
➤ Holds Through a Thick Case — Not Just Bare Glass: Dual-layer neodymium magnets pull hard enough to grip your phone through a heavy-duty case with a metal plate inside, so you don't have to strip it down before every drive.
➤ 11 lbs Vacuum Base That Doesn't Quit on a Hot Day: A twist-lock vacuum seal — not cheap 3M adhesive — grabs your dashboard with 11 lbs of suction force. Twist to lock, twist to release. No residue, no peel.
➤ Three-Axis Fold for Any Viewing Angle You Want: 180° at the head, 360° at the stem, 180° at the base. Portrait for Maps, landscape for CarPlay, low-profile when parked — flick it into position one-handed.
How VeloGrip™ Holds When Every Other Mount Slides
Two systems doing two jobs. Dual-layer magnets stack the pull from both sides of the contact ring, so the grip on your phone gets stronger as the load shifts during a turn — not weaker. Underneath, a twist-lock vacuum seal creates a low-pressure pocket between the base and your dashboard, locking the whole mount in place with 11 lbs of pull force.
It's the difference between a phone holder built for a stationary desk and a phone holder built for potholes, speed bumps, and the on-ramp at 65 mph. Set it once. Drive normally. Stop worrying.
Why Drivers Who've Been Through Five Mounts Finally Stopped Buying Replacements
"I bought this expecting to return it. I've got a thick case with a wallet on the back and every magnetic mount I've tried just gives up. Six weeks in, VeloGrip™ hasn't budged once — not even on the gravel road to my parents' place." — Marcus T.
"My old suction mount fell off my windshield in 95° heat last August. Tried this on the dashboard instead — it's been on there through two summers now. No peel, no slide." — Dana R.
Hands on the Wheel. Eyes on the Road. Phone Where You Put It.
✓ One-Handed Snap and Twist: Drop your phone onto the magnetic ring, twist to your angle, drive. No clamps to release, no arms to adjust, nothing that takes both hands.
✓ Built to Hold Through Potholes and Hard Brakes: Magnets and vacuum work together — the harder the jolt, the more both grips engage. Tested by drivers on gravel roads and city potholes alike.
✓ Aluminum Alloy Core That Outlasts Your Phone: CNC-machined aluminum hinges and ABS plastic housing — no flimsy plastic ball joints that snap after a winter.
Three Steps to a Mount You'll Never Have to Replace
Step 1: Wipe your dashboard or windshield clean — a dry, dust-free surface gives the vacuum seal its full 11 lbs of pull.
Step 2: Press the base down firmly and twist the dial to "TIGHT" until the vacuum locks. You'll feel it grip.
Step 3: Snap your phone onto the magnetic ring, fold and rotate to your angle, and drive normally.
| VeloGrip™ 360° Magnetic Mount | $12 Vent Clips & Suction Mounts | Cup Holder / Loose on Seat |
|---|---|---|
| Holds your phone through a thick case with dual-layer magnets | ❌ Slips with anything thicker than a slim case | ❌ Slides into the footwell every brake |
| 11 lbs twist-lock vacuum base — no peeling adhesive | ❌ 3M tape peels in summer heat | ❌ Nothing securing the phone at all |
| Three-axis fold for any portrait/landscape angle, one-handed | ❌ Two or three fixed positions, both hands needed | ❌ You're glancing down, not looking forward |
Specs That Matter Before You Buy
- Build: CNC-machined aluminum alloy hinges, ABS plastic housing
- Vacuum Base Pull Force: 11 lbs (twist-lock seal)
- Magnet System: Dual-layer neodymium ring
- Phone Compatibility: Fits 4.7" to 7" devices (works through most cases with included metal plate)
- Rotation: 360° stem, 180° head, 180° base
- Color: Black or Silver
The Questions Drivers Ask Before They Hit Add to Cart
Will the suction hold on a hot dashboard in summer?
Yes — this is a twist-lock vacuum seal, not 3M adhesive, so heat doesn't peel it. Drivers report stable hold through 95°+ summer dashboards. If grip ever fades, a quick wipe on the suction pad refreshes the seal.
Will it hold my phone with a thick OtterBox or wallet case?
Yes. The dual-layer magnet pulls hard enough to grip through most heavy-duty cases. For extra thick or non-metallic cases, the included metal plate sticks inside your case or to the back of your phone for a rock-solid bond.
Will the magnets mess with my phone or wireless charging?
No. The magnets create a closed field that holds your phone without affecting GPS, calls, or battery. Wireless charging will work normally when your phone is off the mount.
Will it stick to a curved or textured dashboard?
It grips best on flat, smooth surfaces — clean glass windshields, hard-plastic dash panels, center consoles. Textured leather or fabric dashboards aren't a good fit for the vacuum base.
How do I remove it without leaving residue?
Twist the dial back to "LOOSE" — the vacuum releases and the base lifts off clean. No tape, no glue, no sticky residue on your dashboard.
If VeloGrip™ Slips Even Once, We'll Refund Every Cent
Mount it. Drive it for 60 days. If the magnets ever drop your phone or the vacuum base lets go on a flat dashboard — we'll refund you in full. We can say that because we know what's holding it together.
